The Jabsco 82600-0092 PAR-Max Plus water system pump is designed to provide high-pressure water to larger water systems. With a 60psi pressure switch and 6 gallons per minute capacity, the PAR-Max Plus 6.0 can easily handle a five-fixture water system. PAR-Max Plus series water pressure pumps are certified to EN ISO 8846 Marine (Ignition Protection). The sealed switch and co-injected molded diaphragm eliminate leak paths, and the larger, heavier duty motor brushes significantly extend the pump's lifespan.
Pump Specifications:
- Flow Rate: 6 gallons per minute (23lpm)
- Pressure Switch: Shut off @ 60psi (4.3 bar)
- Ports: 3/4" (19mm) Quick Connect
- Pump Motor Amp Draw: 17 Amps maximum
- Priming: From dry: 7.8ft From wet: 10ft
- Dimensions: L–10.6" W–5.09" H–4.72"
- Net Weight: 7.6lb (3.5kg)
From the manufacturer:
The high-pressure capability of the new Jabsco PAR-Max Plus Series water pressure pumps [...] provides exceptional flow and consistent water pressure to easily handle the demand of multiple outlets. All PAR-Max Plus models include soft rubber mounts and quick connect fittings for ease of installation. The patented PAR-Max Plus co-injected molded diaphragm and larger heavier duty motor brushes significantly extend pump life up to 50% longer than existing Jabsco PAR-Max Series diaphragm pumps. [...] Available in both 12 or 24 volt DC versions, the PAR-Max Plus series water pressure pumps are certified to EN ISO 8846 Marine (Ignition Protection).
