Macerator Pumps & Parts
Macerator Waste Pumps are used to empty waste holding tanks on RVs, boats, and similar vehicles. By breaking soft waste into smaller pieces, the waste can easily pass through a regular hose, making the job of emptying waste tanks much easier. By using a macerator pump, and flushing your tank with water periodically, you can virtually eliminate any clogging in your waste system.
Flojet/Jabsco 18500 series Macerator pumps grind sewage waste down to particles 1/8" diameter or less, allowing easy tank pumping through a standard 5/8" garden hose (or other similarly sized hose). These pumps will empty most recirculating toilets in under two minutes, and a standard 30 gallon holding tank in three minutes or less. Their self-priming design allows installation above the tank, if that is most convenient. (NOTE: Macerator pumps are designed ONLY to handle soft waste and tissue. Solid objects, or sanitary napkins, can clog or damage the pump, and void any applicable warranty.)
-
6303-0003 Flojet/Jabsco Macerator Impeller Kit
$24.37 -
18598-2000 Flojet/Jabsco Macerator Service Kit, Garden Hose
$65.82 -
18594-1001 Flojet Macerator Inlet Housing 3" Flush Fitting
$65.12 -
Flojet 91010250 Macerator Rinse Hose Adapter
$25.54
-
91010-253A Flojet Macerator Adapter O-ring Kit
$10.64 -
18598-1000 Flojet/Jabsco Macerator Service Kit, Hose Barb
$60.04 -
17288-0000 3.75" Flojet/Jabsco Macerator Pump Stud (pair)
$17.76 -
17288-0010 3.125" Flojet/Jabsco Macerator Pump Stud (pair)
$24.84