Macerator Pumps & Parts
Macerator Waste Pumps are used to empty waste holding tanks on RVs, boats, and similar vehicles. By breaking soft waste into smaller pieces, the waste can easily pass through a regular hose, making the job of emptying waste tanks much easier. By using a macerator pump, and flushing your tank with water periodically, you can virtually eliminate any clogging in your waste system.
Flojet/Jabsco 18500 series Macerator pumps grind sewage waste down to particles 1/8" diameter or less, allowing easy tank pumping through a standard 5/8" garden hose (or other similarly sized hose). These pumps will empty most recirculating toilets in under two minutes, and a standard 30 gallon holding tank in three minutes or less. Their self-priming design allows installation above the tank, if that is most convenient. (NOTE: Macerator pumps are designed ONLY to handle soft waste and tissue. Solid objects, or sanitary napkins, can clog or damage the pump, and void any applicable warranty.)
-
Jabsco 22130-2721 120V RV/Marine Macerator
$725.00- 120V AC pump, grinds ~12gpm to 1/8"
- Self-priming: 5ft. lift when wet, 4ft. when dry
- 1.5in. hose barb inlet, 1in. ID hose barb outlet
- Can be mounted in any position
- Designed for permanent installation