Water System Pumps & Parts
A pressure pump is an essential part of any household water system, that is not connected to a water utility service. Typically, a pressure pump will be used to pump water from your holding tank to the rest of your water system. Some water systems may require more than one pump (a deep well pump or a transfer pump, for filling the holding tank), while other systems may do well with just the pressure pump.
Properly designed systems will also include an inlet filter, to protect the pump from waterborne debris. We carry a variety of Flojet inlet strainers. The U.S. 40 Mesh strainer screen will block any particle larger than 0.0165 inches (420 microns) from entering the pump, and the transparent covers allow quick visual inspection of the filter screen. You can remove the cover to easily rinse any debris out, if it becomes clogged.
Most water pressure pumps should also be used with an accumulator/pressure tank. Unless you purchase a variable speed pump (like the Flojet R4525), an accumulator tank will help reduce pump cycling, and sudden changes in water pressure ("chatter" or "water hammering") in your pipes. An accumulator tank is installed after the pressure pump and matched to the pump's pressure switch settings, to hold a small reserve of pressurized water to supply a smooth, constant flow of water.
-
Flojet 20381-009 Adapters Quad Port to 1/2" Hose Barb - 90deg
$5.28- 90 degree Quad port to hose barb adapters
- Makes disconnecting your pump fast and easy
- Perfect for systems that need to be winterized
-
Flojet 20717-100A Quad II Feet Replacement, Kit of 4
$5.76- Replacement Flojet Mounting Feet
- Set of 4 slide-on rubber feet
- Fits Flojet Quad pumps
-
Flojet 20381-034 Adapter Quad Port to 1/2"-14 QEST Thread
$6.72- Two (2) straight quad port-to-1/2 inch-14 QEST thread fittings/adapters
- For 04XXX-series Flojet pumps
-
Flojet 1740-002 1/2" Hose Barb Inline Strainer
$20.87- Increase your pump life
- 40 mesh inlet strainer for water pumps<\li>
- Inlet: 0.5 inch hose barb<\li>
- Outlet: 0.5 inch hose barb
-
2091-025 Flojet 25 psi Triplex Pressure Switch Kit
$38.12- 25 psi pressure switch kit
- Fits Flojet Triplex pumps
- Includes instructions
-
2090-770 Flojet VersiJet 70 psi Pressure Switch Kit
$38.12- 70psi pressure switch kit
- For Flojet R8600 Series
-
2095-105 Flojet 30 psi 2100 Pressure Switch Kit
$38.12- 30psi pressure switch replacement
- For following models:
- 2100-12A, 2100-740A, 2100-750A
-
Flojet 20401-000 Quad Pump Bearing Cover
$24.51- Replacement Flojet pump bearing cover
- For Flojet 4100 & 4300 series pumps
-
Flojet 1740-004 1/2" Pipe Thread Inline Strainer
$20.87- 40 mesh inlet strainer for water pumps
- Inlet/Outlet: 0.5 inch 14 male pipe thread
-
Flojet 20407-030 Check Valve Assembly
$28.82- Flojet replacement valve chamber assembly
- For Flojet Quad pump models:
- 4300-143, 4305-144, 2840 & 2880 series, 4325 series
- See below for detailed model list