Search Site

Water System Pumps & Parts

A pressure pump is an essential part of any household water system, that is not connected to a water utility service. Typically, a pressure pump will be used to pump water from your holding tank to the rest of your water system. Some water systems may require more than one pump (a deep well pump or a transfer pump, for filling the holding tank), while other systems may do well with just the pressure pump.

Properly designed systems will also include an inlet filter, to protect the pump from waterborne debris. We carry a variety of Flojet inlet strainers. The U.S. 40 Mesh strainer screen will block any particle larger than 0.0165 inches (420 microns) from entering the pump, and the transparent covers allow quick visual inspection of the filter screen. You can remove the cover to easily rinse any debris out, if it becomes clogged.

Most water pressure pumps should also be used with an accumulator/pressure tank. Unless you purchase a variable speed pump (like the Flojet R4525), an accumulator tank will help reduce pump cycling, and sudden changes in water pressure ("chatter" or "water hammering") in your pipes. An accumulator tank is installed after the pressure pump and matched to the pump's pressure switch settings, to hold a small reserve of pressurized water to supply a smooth, constant flow of water.

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  1. Flojet mini accumulator tank .6L 30573-0003

    Flojet 30573 0.6L Mini Pressure Accumulator Tank

    $49.79
    • 0.6L mini accumulator tank
    • Reduces pump cycling and water pressure fluctuations
    • Default tank pre-charge pressure: ~10psi
    • Quick-connect/disconnect port flttings
    • Mounting point for optional pressure switch
    • Food grade materials, NSF Standard 18 listed
    Learn More
  2. 20404-000

    20404-000 Flojet 4406 Upper Housing

    $64.79
  3. Upper housing assembly
  4. Fits following Flojet models:
  5. 4406-043, 4406-143, 4406-343
  6. Learn More
  • 2090-108 Flojet 20 psi Pressure Switch Kit

    2090-108 Flojet 20 psi Pressure Switch Kit

    $38.12
    • 35psi pressure switch kit
    • For Flojet models: 4305-503 and 4305-502
    Learn More
  • Flojet 1740-002 1/2" Strainer

    Flojet 1740-002 1/2" Hose Barb Inline Strainer

    $20.87
    • Increase your pump life
    • 40 mesh inlet strainer for water pumps<\li>
    • Inlet: 0.5 inch hose barb<\li>
    • Outlet: 0.5 inch hose barb
    Learn More
  • 2090-115 Flojet 95 psi Pressure Switch Kit

    2090-115 Flojet 95 psi Pressure Switch Kit

    $38.12
    • 95 psi pressure switch kit
    • Fits Flojet pressure booster pumps
    • See below for safety info
    Learn More
  • 18948-0001

    Jabsco 18948-0001 Neoprene Cooling/Bilge Pump Impeller Kit

    $40.24
    • Replacement water pump impeller kit
    • 12-blade neoprene key-drive impeller
    • Brass center/shaft insert
    • For engine-cooling/bilge pump
    Learn More
  • 20717-100A

    Flojet 20717-100A Quad II Feet Replacement, Kit of 4

    $5.76
    • Replacement Flojet Mounting Feet
    • Set of 4 slide-on rubber feet
    • Fits Flojet Quad pumps
    Learn More
  • 20500-507

    Flojet 20500-507 Upper Housing, 2100 Series

    $20.67
    • Replacement Upper Housing
    • Polypropylene, 3/8" NPT Ports
    • Fits Flojet 2100-series Duplex pumps
    Learn More
  • 1740-950S

    Flojet 1740-950S Quad M to Quad F Strainer

    $20.87
    • 40 mesh inlet strainer for water pumps
    • Inlet: Quad Port female
    • Outlet: Quad Port male
    • Connects directly to pump at the Quad Port fitting
    Learn More
  • 20381-010

    Flojet 20381-010 Adapter Quad Port to 3/4" Hose Barb - 90deg

    $6.48
    • 90 degree Quad port to hose barb adapters
    • Makes disconnecting your pump fast and easy
    • Perfect for systems that need to be winterized
    Learn More
  • Page:
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5

    Back to top