Jabsco 23920-9213 12V Utility Puppy 3000 Water Pump


  • 12V General Purpose/Bilge Pump
  • Pumps 10 GPM at 10 feet of lift
  • Heavy duty bronze pump body
  • Flexible impeller: No inlet strainer needed
SKU: 23920-9223 Categories: , Tags: , ,


Jabsco 23920-9213 is a 12 volt DC continuous rated, heavy duty, dry running pump for bilge, deckwash and general purpose use.

Not for use with Petrol or products with a flash point below 37 deg C. This product is NOT flame proof.

Simple design means fewer wearing parts.

Bilge debris presents no problem to this bronze bodied, flexible impeller pump. No inlet filter required.

612 gph / 10 gpm output (43 L.P.M). 28 psi (1.9 bar) stall pressure.

Self Priming to 8 ft. (2.4M).

3/4″ NPT threaded, female. To be used with 1″ i.d. suction and discharge hoses.

Ten minute dry running time (after initial prime).

Long life mechanical seal. Nitrile Impeller.

21 amp draw, 25 amp fuse (max fuse size). Use 10 gauge wiring up to 20 feet, 8 gauge over 20 feet.

Does not include an on/off switch or fusing.

Meets USCG Regulation 183.410 & ISO 8846 Marine (ignition protection).

ISO 8849 Marine Bilge Pump standard.

Limited stock availability.

See 23920-9313 for 24 volt DC.

239209213, Xylem, Flojet

Additional information

Weight11.35 lbs